Seal gaps and insulate with DAP's line of foam insulating products. Included are straw foams, gun foams, canister foams, and spray foam Insulation kits.  We also offer a constant pressure dispensing system and spray foam tools and accessories to help get the job done.  Many applications include

• Touch 'n Foam
• Touch 'n Seal
• Poly-Clean
• DRAFTSTOP
• DAPtex
• Barrier Multi-Project Ready-to-Use Foam

 

Dupont Rigid Foam Insulation replaces non-insulating above-grade sheathing products like plywood, fiberboard and OSB, and eliminates the need for additional air barriers such as housewrap. It has clear film facings on both sides for added durability.

Styrofoam Boards are also designed for insulating interior basement walls, crawl spaces, and ceilings in both renovation and retrofit situations with precut insulation sheets and slotted edges that accommodate wood nailing strips that serve as a nailing base for drywall.

Dupont FROTH-PAK™ Foam Insulation is a two-component professional insulation kit. FROTH-PAK comes as a professional sealant for air sealing gaps and penetrations up to 4 inches wide or as a spray foam insulation to fill larger cavities providing both insulation and air sealing properties. The Class-A rating (flame spread of 25 or less) of FROTH-PAK™ Foam Insulation allows its use in a wide range of interior and exterior industrial, commercial, institutional and residential settings.

Insulating heating and air conditioning ducts with duct insulation from Frost King improves efficiency as it reduces vibration and noise.

Frost King pipe insulation reduces costly heat loss from hot water pipes and prevents freezing and sweating of cold water pipes.

Protect expensive units and stop wasteful leaks with winterized poly/fabric covers, compressible foam strips and outlet sealers from Frost King.

Knauf's cost-effective thermal and acoustical batts and blankets are made from highly resilient, inorganic glass fibers bonded by a thermosetting resin.

The products are available unfaced or with kraft, foil, or flame-rated FSK-25 (Foil-Scrim-Kraft) foil facings.

Knauf JET STREAM™ Fiber Glass Blowing Insulation is typically installed in open attics of both new and existing structures. It can also be used in retrofit closed-cavity applications such as exterior sidewalls or floored attics. Loose-fill blowing insulation is intended for use where pneumatically installed insulation is most cost-effective.

Knauf duct insulation is designed for commercial and residential air handling installations for cooling, heating, or dual-temperature service where good temperature control, noise absorption, and abuse resistance are required.

Available as board, liner, wrap and rigid plenum liner.

Knauf insulation board is a versatile product for thermal and acoustical applications such as: heating and air-conditioning ducts, power and process equipment, boiler and stack installations, metal and masonry walls, wall and roof panel systems, curtain wall assemblies, and cavity walls.

Available plain, with a factory-applied FSK facing or PSK (metalized polypropylene-scrim-kraft) facing, or with a factory-applied all-service jacket (ASJ).

M-D Building Products pipe insulation is available in many styles from fiberglass pipe wrap to pipe heating cables with thermostats.

HALO® is an Advanced Graphite Insulation System (GPS) that features a series of rigid insulation products, provides a stable R5 per nominal inch, perfectly designed for below and above-grade, interior or exterior applications.  Offering a high performance, low carbon graphite polystyrene core with a series of ingenious laminate surfaces, each one customized to its particular use. Upon request, custom sizes and Preventol® additive for termite control are available. 

Perma “R” Brace SIB is a lightweight, 4-in-1 structural sheathing solution that provides four layers of enforced protection against water, moisture vapor, mold, and more. All the benefits of our Perma “R” Brace with the added value of our stable, R5 per nominal inch GPS (Graphite Polystyrene) rigid foam.

 

 

PolyPro™ EPS rigid insulation provides a stable R3.85 per inch for interior and exterior applications. Whether metal-poly or poly-poly faced, our factory laminated facers are micro-perforated to reduce moisture buildup in the wall to prevent mold or mildew.  Upon request, custom sizes and Preventol® additive for termite control are available. 

Reflectix wants to be your first choice for reflective insulation. Our committment to quality and service is unparalleled. Our dedication to products and service above and beyond your expectations, is evident in sales, customer service, quality control and production level personel at Reflectix. We stand behind every Reflectix product.

White Lightning® offers products that permanently fill gaps and cracks to insulate against drafts as well as removable sealants for temporary weather stripping.

For installation convenience and exceptional, long-term performance, the all-in-one ZIP System® R-Sheathing panel provides a new approach to sealing and insulating the building envelope. One panel delivers thermal, air and moisture resistance, while providing excellent strength and durability.